 |
|
||||
 |
|||||
|
 |
||||
 |
|
|
||||
|
|||||
|
|
||||
|
 |
||||
Reflect is a highly reflective heat-applied material used for cutting. It is ideal for use on safety wear for municipalities, athletic wear or any clothing that calls for high visibility.
|
||||
|
Application Instructions: *Reminder, Reflect designs must be cut in REVERSE. 1) PREHEAT - Preheat garment at a temperature of 302º F for 4 seconds to remove moisture and wrinkles. 2) APPLY - Apply Reflect designs to substrate for 15 seconds at a temperature of 302º F using LIGHT pressure. 3) PEEL - After garment has completely cooled, remove mylar backing from Reflect. PEEL COLD! |
||||
|
CARE INSTRUCTIONS: ** Machine wash using mild detergent at 86º F max. ** Dry at a normal dryer setting on household machines. ** Do not iron directly onto this material. ** Do not dry clean.
All technical information and recommendations are based on tests we believe to be
reliable. However, we cannot guarantee performance under conditions not under
manufacturer's control. Before using, please determine the suitability of product for
it's intended use. The user assumes all risk and liability whatsoever in connection
with the use of this product. Seller's and manufacturer's only obligation shall be to
replace such quantity of the product proved to be defective by the manufacturer.
|
