 |
Pressure Sensitive Poly-Twill™ is backed with a "peel and stick" adhesive designed to allow quick and easy positioning of appliqués for sewing without tacking (heat application).
| Available: |
By the yard in 51" width rolls |
| Recommended Fabrics: |
100% cotton, 100% polyester, poly/cotton blends, Nylon and Satin |
|
Application Instructions:
1) PREHEAT - Preheat garment for 4 seconds to remove moisture, chemicals, etc. (Use pillow if decorating full back.)
2) APPLY - Place twill cuts on garment. Cover with Teflon and heat apply according to the following specifications: Light Pressure
330° - 350°F for 8-10 seconds.
3) SEW - Twill decorations made from Pressure Sensitive Poly-TWILL™ must be sewn to prevent fraying.
** It is recommended to cure the garment for 48 hours once heat applied.
|
CARE INSTRUCTIONS:
** Machine wash in cool water.
** Dry on medium heat.
|
|
All technical information and recommendations are based on tests we believe to be
reliable. However, we cannot guarantee performance under conditions not under
manufacturer's control. Before using, please determine the suitability of product for
it's intended use. The user assumes all risk and liability whatsoever in connection
with the use of this product. Seller's and manufacturer's only obligation shall be to
replace such quantity of the product proved to be defective by the manufacturer.
|
