 |
|
||||
 |
|||||
|
 |
||||
 |
|
|
||||
|
|||||
|
|
||||
|
 |
||||
Gorilla Grip II Metallic offers all the same features and characteristics as Metallic as well as a metallic matte finish available in gold and silver.
|
||||
|
Application Instructions: *Reminder, Metallic designs must be cut in REVERSE. 1) PREHEAT - Preheat garment at a temperature of 330º F for 4 seconds to remove moisture and wrinkles. 2) APPLY - Apply Metallic designs to substrate for 10 - 15 seconds at a temperature of 330º F using MEDIUM pressure. 3) PEEL - After garment has completely cooled, remove mylar backing from Metallic. PEEL COLD! |
||||
|
2 COLOR APPLICATION 1) APPLY - Apply the first layer of Metallic for 6-8 seconds at 330º F using MEDIUM pressure. 2) PEEL - After the garment has completely cooled remove the mylar backing from Metallic. 3) APPLY - Apply the second layer of Metallic for 6-8 seconds at 330º F using MEDIUM pressure. 4) PEEL - After the garment has completely cooled remove the mylar backing from Metallic. PEEL COLD! 5) COVER - Cover both layers with either Kraft paper or Teflon and heat apply again for 6-8 seconds using the same temperature and pressure. PEEL HOT! |
||||
|
CARE INSTRUCTIONS: ** Machine wash using mild detergent at 176º F max. ** Dry at a normal dryer setting on household machines. ** Do not iron directly onto this material. ** Do not dry clean.
All technical information and recommendations are based on tests we believe to be
reliable. However, we cannot guarantee performance under conditions not under
manufacturer's control. Before using, please determine the suitability of product for
it's intended use. The user assumes all risk and liability whatsoever in connection
with the use of this product. Seller's and manufacturer's only obligation shall be to
replace such quantity of the product proved to be defective by the manufacturer.
|
