 |
Glo is a heat-applied material used for cutting. Glo glows in the dark and is ideal for creating designs for theatre, dance club, skate boarding, and extreme sports attire.
| Available: |
20" width x 5yd, 10yd, 25yd, & 50 yd. rolls |
| Recommended Fabrics: |
For 100% cotton, 100% polyester & poly/cotton blends, Nylon and Lycra. |
|
Application Instructions:
*Reminder, Glo designs must be cut in REVERSE.
1) REMOVE - Remove the protective liner from the adhesive side of Glo before cutting.
2) PREHEAT - Preheat garment at a temperature of 285º F for 4 seconds to remove moisture and wrinkles.
3) APPLY - Apply Glo designs to substrate for 10 seconds at a temperature of 285º F using MEDIUM pressure.
4) PEEL - After garment has completely cooled, remove mylar backing from Glo designs. PEEL COLD!
|
|
All technical information and recommendations are based on tests we believe to be
reliable. However, we cannot guarantee performance under conditions not under
manufacturer's control. Before using, please determine the suitability of product for
it's intended use. The user assumes all risk and liability whatsoever in connection
with the use of this product. Seller's and manufacturer's only obligation shall be to
replace such quantity of the product proved to be defective by the manufacturer.
|
