 |
|
||||
 |
|||||
|
 |
||||
 |
|
|
||||
|
|||||
|
|
||||
|
 |
||||
DuraCut™ cuttable ink sheets produce a finish identical to the look of screen-printing! They are soft to the hand, great for short runs & ideal for one-color team names & number designs!
|
||||
|
1) CUT DESIGN - Feed the sheet into the cutter. Be sure that the colored ink on the sheet faces up. Cut the design in REVERSE / MIRROR format. Weed away the excess material, leaving only the design on the paper backing.
2) PREHEAT - Preheat garment for 10 seconds to remove moisture and wrinkles. 3) POSITION - Position the design on the garment with the paper backing side face up. Cover with release paper to protect the heat platen from heavily dyed fabrics leaching color. 4) HEAT APPLY - Apply DuraCut™ for 15 seconds at the temperature of 350°F using HEAVY pressure. Raise platen slowly. COLD PEEL! |
||||
|
CARE INSTRUCTIONS: ** Turn garment inside out ** Machine wash in warm or cold water (122°F max) using mild detergent ** DO NOT BLEACH ** DO NOT iron directly on transfer.
All technical information and recommendations are based on tests we believe to be
reliable. However, we cannot guarantee performance under conditions not under
manufacturer's control. Before using, please determine the suitability of product for
it's intended use. The user assumes all risk and liability whatsoever in connection
with the use of this product. Seller's and manufacturer's only obligation shall be to
replace such quantity of the product proved to be defective by the manufacturer.
|
